Electrical and sintering behaviour of Y2Zr2O7 (YZ) pyrochlore based materials: the influence of bismuth
IR@CECRI: CSIR-Central Electrochemical Research Institute, Karaikudi
View Archive Info| Field | Value | |
| Title |
Electrical and sintering behaviour of Y2Zr2O7 (YZ) pyrochlore based materials: the influence of bismuth
|
|
| Creator |
Kumar, M.
Anbukulandainathan, M. Arulraj, I. Chandrasekaran, R. Pattabiraman, R. |
|
| Subject |
Electroorganic
Fuel Cells |
|
| Description |
Solid oxide fuel cell can convert fuels rich inH2 into electrical energy directly without pollution by electrochemical reaction with oxygen. The
efficiency of energy conversion and durability of performance mainly depend on the oxide ion conducting solid electrolyte activity. The global
experience gained all these years in the SOFC development has prompted for a change from the state of the art functional electrolyte material,
yttria stabilized zirconia (YSZ) having a conductivity of 0.1 S cm−1 at 1000 ◦C to a new material, which exhibits equivalent conductivity
values in the intermediate temperature range (600–700 ◦C). In this work, Y2Zr207 (YZ), an ionic conducting stable pyrochlore based oxide
prepared by glycine nitrate combustion route is systematically characterised. Both circular and rectangular pellets were fabricated by uniaxial
compression followed by annealing at different temperatures. The functional properties such as porosity, percentage thermal shrinkage in
volume and percentage densification of the sintered pellets are compiled. Bismuth oxide is found to be an effective sintering aid in general. So
the effect of bismuth oxide addition on YZ was investigated through sintering studies, XRD, TGA/DTA, SEM and conductivity measurements.
The results obtained on YZ with and without bismuth oxide addition are discussed with respect to the requirement of an electrolyte for ITSOFC
application.
|
|
| Publisher |
Elsevier
|
|
| Date |
2005
|
|
| Type |
Article
PeerReviewed |
|
| Format |
application/pdf
|
|
| Identifier |
http://cecri.csircentral.net/132/1/070-2005.pdf
Kumar, M. and Anbukulandainathan, M. and Arulraj, I. and Chandrasekaran, R. and Pattabiraman, R. (2005) Electrical and sintering behaviour of Y2Zr2O7 (YZ) pyrochlore based materials: the influence of bismuth. Materials Chemistry and Physics, 92 (2). pp. 295-302. |
|
| Relation |
http://cecri.csircentral.net/132/
|
|