Hard yet tough Ti-TiN nanocomposite coatings
IR@NAL: CSIR-National Aerospace Laboratories, Bangalore
View Archive InfoField | Value | |
Title |
Hard yet tough Ti-TiN nanocomposite coatings
|
|
Creator |
Kataria, S
Barshilia, Harish C Praveen, Kumar Srinivas, G Siju, John Jakeer, Khan |
|
Subject |
Composite Materials
|
|
Description |
Nanocomposite Ti-TiN coatings were deposited on Si (100) substrates using pulsed DC magnetron sputtering as a function of Ti metal content. Structural and microstructural characterizations of the as-deposited coatings were carried out using X-ray diffraction and field emission scanning microscopy. Nano-mechanical properties of the coatings were evaluated using nanoindentation, scratch and wear testing techniques. It was observed that nano-hardness and elastic modulus of the coatings decreased with an increase in Ti content. The H/E ratio, an indicator of wear resistance, was found to vary from 0.074 to 0.101 for the coatings with low Ti content. A linear increase in fracture toughness from 1.19 to 2.75 MPa.m1/2 with increasing Ti content was observed. However, the coating with highest fracture toughness value did not reveal good wear resistance. The coating with a Ti content of 63.3% was found to be optimised for wear resistant applications with a fracture toughness of 2.12 MPa.m1/2 and nano-hardness of around 17.5 GPa.
|
|
Publisher |
National Aerospace Laboratories
|
|
Date |
2011-08
|
|
Type |
Proj.Doc/Technical Report
NonPeerReviewed |
|
Identifier |
Kataria, S and Barshilia, Harish C and Praveen, Kumar and Srinivas, G and Siju, John and Jakeer, Khan (2011) Hard yet tough Ti-TiN nanocomposite coatings. Technical Report. National Aerospace Laboratories, National Aerospace Laboratories.
|
|
Relation |
http://nal-ir.nal.res.in/9956/
|
|