Parameter design for MIG welding of Al-65032 alloy using Taguchi technique
IR@NISCAIR: CSIR-NISCAIR, New Delhi - ONLINE PERIODICALS REPOSITORY (NOPR)
View Archive InfoField | Value | |
Title |
Parameter design for MIG welding of Al-65032 alloy using Taguchi technique
|
|
Creator |
Haragopal, G
Reddy, P V R Ravindra Reddy, G Chandra Mohan Subrahmanyam, J V |
|
Subject |
Al 65032
ANOVA MIG Orthogonal arrays S/N analysis Taguchi method |
|
Description |
844-850
This study presents Taguchi method to design process parameters that optimize mechanical properties of weld specimen for aluminum alloy (Al-65032), used for construction of aerospace wings. Process parameters of MIG welding setup considered are gas pressure, current, groove angle and pre-heat. Assigning process parameters to L-9 orthogonal array, experiments were conducted and optimization condition was obtained along with the identification of most influencing parameters using S/N analysis, mean response analysis and ANOVA. |
|
Date |
2011-09-12T04:34:47Z
2011-09-12T04:34:47Z 2011-10 |
|
Type |
Article
|
|
Identifier |
0975-1084 (Online); 0022-4456 (Print)
http://hdl.handle.net/123456789/12679 |
|
Language |
en_US
|
|
Rights |
<img src='http://nopr.niscair.res.in/image/cc-license-sml.png'> <a href='http://creativecommons.org/licenses/by-nc-nd/2.5/in' target='_blank'>CC Attribution-Noncommercial-No Derivative Works 2.5 India</a>
|
|
Publisher |
NISCAIR-CSIR, India
|
|
Source |
JSIR Vol.70(10) [October 2011]
|
|