A comparative study on microstructure and mechanical properties near interface for dissimilar materials during conventional V-groove and narrow gap welding
IR@NML: CSIR-National Metallurgical Laboratory, Jamshedpur
View Archive Info| Field | Value | |
| Title |
A comparative study on microstructure and mechanical properties near interface for dissimilar materials during conventional V-groove and narrow gap welding
|
|
| Creator |
Nivas, R
Singh, P K Das, Goutam Das, S K Kumar, S Mahato, B Sivaprasad, K Ghosh, M |
|
| Subject |
Materials Charcterization
|
|
| Description |
Low alloy steel and 304 LN austenitic stainless steel pipes were welded together by gas tungsten arc and narrow gap welding. The aim of investigation was to identify particular welding technique, which may able to deliver better joint quality over the other considering mechanical properties of assemblies. Welding consumable was IN82 for both of them. Multilayered buttering was done over low alloy steel prior to welding for conventional GTAW. Microstructural characterisation was done and tensile strength was determined through in-situ deformation of miniature samples for welded joints. Low alloy steel consisted of heat affected zone close to interface. Near fusion boundary between low alloy steel and IN82, islands of martensite, complex alloy carbides, Types-I and II boundaries were formed. Width of heat affected zone and martensite layer was more for conventional welding in comparison to narrow gap welding. During in-situ tensile testing crack was initiated from stress concentration site and propagated through IN82. joint strength and strain hardening co-efficient for narrow gap welded specimen was higher than conventional welded sample. This indicated better formability of narrow gap welded assembly with respect to gas tungsten arc welded specimen. (C) 2016 The Society of Manufacturing Engineers. Published by Elsevier Ltd. All rights reserved.
|
|
| Publisher |
Elsevier
|
|
| Date |
2017-01
|
|
| Type |
Article
PeerReviewed |
|
| Format |
application/pdf
|
|
| Identifier |
http://eprints.nmlindia.org/7604/1/Nivas_2017_274_283.pdf
Nivas, R and Singh, P K and Das, Goutam and Das, S K and Kumar, S and Mahato, B and Sivaprasad, K and Ghosh, M (2017) A comparative study on microstructure and mechanical properties near interface for dissimilar materials during conventional V-groove and narrow gap welding. Journal of Manufacturing Processes, 25 (IF-2.322). pp. 274-283. |
|
| Relation |
http://www.sciencedirect.com/science/article/pii/S1526612516301736
http://eprints.nmlindia.org/7604/ |
|