Precipitation and characterization of zinc borates from hydrometallurgical processing of zinc ash
IR@NML: CSIR-National Metallurgical Laboratory, Jamshedpur
View Archive Info| Field | Value | |
| Title |
Precipitation and characterization of zinc borates from hydrometallurgical processing of zinc ash
|
|
| Creator |
Gostu , S
Mishra, D Sahu, K K Agrawal, A |
|
| Subject |
Metallurgy
|
|
| Description |
Zinc ash has been used as a zinc source for precipitation of zinc borates through leaching-purification-precipitation route. Zinc ash containing about 71% Zn, 0.6% Fe, 28% Cl-, 0.2% Pb, and traces other elements such as Cu, Cd, As etc. in ppm level were leached in sulfuric acid. The leach solutions generated were purified by pH adjustment, followed by precipitation of borates using borax (Na2B4O7 center dot 10H(2)O). It has been observed that, the phase compositions of precipitated zinc borates as well as their morphologies are quite sensitive to B/Zn molar ratio, solution pH, precipitation temperature and ageing period. Precipitation of particular zinc borate phase of interest (3ZnO center dot 3B(2)O(3)center dot 3.5H(2)O) was found to be facilitated at higher precipitation temperature (>= 95 degrees C) and in the pH range 5.5-6.0 with B/Zn molar ratio >4.0. (C) 2014 Elsevier B.V. All rights reserved.
|
|
| Publisher |
Elsevier
|
|
| Date |
2014-11-01
|
|
| Type |
Article
PeerReviewed |
|
| Format |
application/pdf
|
|
| Identifier |
http://eprints.nmlindia.org/7108/1/S%2CGostu%2CML-2014%2CPP-198-201.pdf
Gostu , S and Mishra, D and Sahu, K K and Agrawal, A (2014) Precipitation and characterization of zinc borates from hydrometallurgical processing of zinc ash. Materials Letters, 134 (IF-2.269). pp. 198-201. |
|
| Relation |
http://eprints.nmlindia.org/7073108
http://eprints.nmlindia.org/7108/ |
|