Influence of SiC Particle Addition on the Corrosion Behaviour of 2014 Al-Cu Alloy in 3.5% NaCl Solution
IR@AMPRI: CSIR-Advanced Materials and Processes Research Institute, Bhopal
View Archive Info| Field | Value | |
| Title |
Influence of SiC Particle Addition on the Corrosion Behaviour of 2014 Al-Cu Alloy in 3.5% NaCl Solution
|
|
| Creator |
S , Das
Singh, I.B. Singh, M D.P., Mondal |
|
| Subject |
Building Material Characterization
Microfluidics and Microseparation |
|
| Description |
The influence of silicon carbide particles (SiCp) addition on the corrosion behavior of Al–Cu alloy (2014) was evaluated in 3.5% NaCl solution at 30 °C using microstrucural and electrochemical measurements. Addition of 10 wt.% SiCp to the base alloy is found to increase its corrosion resistance considerably. Incorporation of SiCp beyond this proportion leads to an increase in corrosion rate of the synthesized composites. Addition of 25 wt.% SiCp to base alloy decreases corrosion resistances considerably. Microstructural studies reveal the agglomeration of SiC particles in the composites. This results an increase of corrosion reaction with the increase of SiC particles in the composites. EIS measurement indicates the occurrence of adsorption/diffusion phenomena at the interfaces of the composites that ultimately initiate the localized or pitting corrosion.
|
|
| Publisher |
ELSEVIER
|
|
| Date |
2008
|
|
| Type |
Article
PeerReviewed |
|
| Identifier |
S , Das and Singh, I.B. and Singh, M and D.P., Mondal (2008) Influence of SiC Particle Addition on the Corrosion Behaviour of 2014 Al-Cu Alloy in 3.5% NaCl Solution. Corrosion Science. ISSN http://dx.doi.org/10.1016/0010-938X(90)90015-W
|
|
| Relation |
http://ampri.csircentral.net/899/
|
|